Pressure Washers and Pumps - The Pro Group https://dev.protoolandsupply.com Building & Road Construction Equipment for Supply, Rent and Repair Fri, 19 Jan 2024 20:19:42 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 Tsurami NK Series Electric Pump https://dev.protoolandsupply.com/product/tsurami-nk-series-electric-pump/?utm_source=rss&utm_medium=rss&utm_campaign=tsurami-nk-series-electric-pump https://dev.protoolandsupply.com/product/tsurami-nk-series-electric-pump/#respond Fri, 19 Jan 2024 19:29:39 +0000 https://dev.protoolandsupply.com/?post_type=product&p=21404 Heavy duty, high head single-phase electric pump available in 110v or 220v. Optional agitator kits allow continuous duty when pumping abrasive materials.

The post Tsurami NK Series Electric Pump first appeared on The Pro Group.

]]>
  • Heavy Duty, high head single phase electric pump.
  • 110v or 220v.
  • Optional agitator kits allow continuous duty when pumping abrasive materials.
  • Synthetic Rubber Wear Parts for maximum durability and pump performance.
  • Continuous duty, air-filled motor.
  • Ductile iron semi-vortex impeller.
  • Dual voltage available on NK2-15 model.

    • The post Tsurami NK Series Electric Pump first appeared on The Pro Group.

    ]]>     https://dev.protoolandsupply.com/product/tsurami-nk-series-electric-pump/feed/ 0     Tsurami LB Series Electric Pump https://dev.protoolandsupply.com/product/tsurami-lb-series-electric-pump/?utm_source=rss&utm_medium=rss&utm_campaign=tsurami-lb-series-electric-pump https://dev.protoolandsupply.com/product/tsurami-lb-series-electric-pump/#respond Fri, 19 Jan 2024 19:27:01 +0000 https://dev.protoolandsupply.com/?post_type=product&p=21402 The Tsurami electric pump's top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low levels and extended dry-run capacity.

    The post Tsurami LB Series Electric Pump first appeared on The Pro Group.

    ]]>
  • Top discharge provides maximum motor cooling while allowing continuous duty operation.
  • Single-phase or three-phase.
  • Pumps fit into 8-inch pipes.
  • Urethane Semi Vortex Impeller and elastomer lined pump casing for maximum wear life.

    • The post Tsurami LB Series Electric Pump first appeared on The Pro Group.

    ]]>     https://dev.protoolandsupply.com/product/tsurami-lb-series-electric-pump/feed/ 0     BJM SV-Series Trash Pump https://dev.protoolandsupply.com/product/bjm-sv-series-trash-pump/?utm_source=rss&utm_medium=rss&utm_campaign=bjm-sv-series-trash-pump https://dev.protoolandsupply.com/product/bjm-sv-series-trash-pump/#respond Fri, 19 Jan 2024 19:17:29 +0000 https://dev.protoolandsupply.com/?post_type=product&p=21398 The SV trash pump is equipped with Vortex impellers, the best non-clog impellers for mud, raw sewage, viscous liquids, rags, wood chips and other solids.

    The post BJM SV-Series Trash Pump first appeared on The Pro Group.

    ]]>     They pass solid up to 90% of the pump outlet diameter.

    • Longer Power Cord. Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
    • 304SS Motor Housing. Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
    • Three Seal Motor Protection. Motor is protected by double mechanical seals. The lower seal is made of silicon carbide/silicon carbide and the upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
    • More Motor Protection. Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F and is superior to pumps with Class A and B insulation. Automatic switch turns the pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
    • Tough Pump Construction. Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

    The post BJM SV-Series Trash Pump first appeared on The Pro Group.

    ]]>     https://dev.protoolandsupply.com/product/bjm-sv-series-trash-pump/feed/ 0     BJM R Series Pump https://dev.protoolandsupply.com/product/bjm-r-series-pump/?utm_source=rss&utm_medium=rss&utm_campaign=bjm-r-series-pump https://dev.protoolandsupply.com/product/bjm-r-series-pump/#respond Fri, 19 Jan 2024 19:14:48 +0000 https://dev.protoolandsupply.com/?post_type=product&p=21396 The Bullet R Series pumps are ideal for dewatering construction sites, mines, or for all around use in industrial plants and utilities.

    The post BJM R Series Pump first appeared on The Pro Group.

    ]]>
  • Top Discharge. Allows for superior cooling of motor and provides a slim line design.
  • Longer Power Cord. Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
  • 304SS Motor Housing. Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection. The motor is protected by double mechanical seals. The lower seal is made of silicon carbide/silicon carbide and the upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection. Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F and is superior to pumps with Class A and B insulation. Automatic switch turns the pump motor off if the temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Tough Pump Construction. Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.

    • The post BJM R Series Pump first appeared on The Pro Group.

    ]]>     https://dev.protoolandsupply.com/product/bjm-r-series-pump/feed/ 0